OK I've figured it out how to restore my previous Genuine licensed, after i got this message saying that my windows is not genuine. In my case i already applied RemoveWat 2.2.6 before i installed SP1,but then after i installed SP1 on my PC it was a mess.
After i installed SP1
After steps applied - or in your case the "Windows Activation" INFO may not appear,but that's fine.
IMPORTANT: For those who haven't install SP1 patch and planning to install it.Manually download SP1[link below].First make sure you implement this two steps [1 and 7] and do this method here.
Install SP1 and do the entire process[1-7].
If SP1 installed already,apply the whole steps.
The validation and updates will still be available after you apply the steps.
GOOD LUCK!
1. First we need to Uninstall Windows Activation Technologies (WAT KB971033) it has to be removed before we proceed.
Go to Control Panel > Programs and Features and Click "View Installed Updates" on the upper left corner. Then right click to “Uninstall” the patch then press "Yes" as shown below.
Or Do this Manually
Go to "*\system32" folder and delete the folder 'Wat'(download TakeOwnership file here merge it to your registry).
2. Run RemoveWat 2.2.6 [Run as Administrator]Click "RemoveWat" button, then restart.Download link posted below.[If 'RemoveWat' button is not available,proceed step 3]
3. After you reboot repeat step 1 to check whether the (KB971033) patch is properly removed. If patch appeared on the list proceed to step 1 except step 2[if not on the list proceed step 3a] and after you “Uninstall” Patch (KB971033) on the second time open “Task Manager” Click on the “Processes” Tab, find “dllhost.exe” then End this Process.
3a.Download this:
For 32bit OS -
Paste the file downloaded on *\windows\system32 folder,but first delete file 'systemcpl.dll' on
*\windows\system32 folder.
Go to System32& Right Click the file "systemcpl.dll" Select "Take Ownership"
Right click systemcpl.dll file select Properties.Click "security" tab,click "Edit" button.And on every User names or Group below tick "Full Control" apply and delete the file.Paste the downloaded one.
3b. To remove watermark
use this method here
4. After reboot
Download my slmgr file,link posted below
For 32bit OS: paste it on "C:\Windows\System32" Folder
For 64bit OS: Paste it on "C:\Windows\SysWOW64" and "C:\Windows\System32" folder.
5. Click Start Button and type “cmd” then important to run “CMD” as administrator.
On cmd type the following command “slmgr[space]-rearm” and a msgbox will appear says that you have to restart your pc press ok then restart.
6.After restart,run CMD as administrator type the following command "slmgr[space]-ato",press OK.[if error occur ignore it].
Go to system32\en-US folder and delete the file "slui.exe.mui"
7. Click Start button type "Windows Update" and run,Click "Change Seetings" and set "Important Updates" to "Let me choose whether to download or Install them" press Ok,click "Check for Updates".If windows finds an important update,click on it to verify.
7. Click Start button type "Windows Update" and run,Click "Change Seetings" and set "Important Updates" to "Let me choose whether to download or Install them" press Ok,click "Check for Updates".If windows finds an important update,click on it to verify.
If patch (KB971033) is on the list, right click then "Hide Update",else don't hide if its not (KB971033).
Download Service Pack 1 for x86 version and x64 click this link.
RemoveWat 2.2.6
slmgr [New 2/28/11]
Acknowledge:
-People behind RemoveWat
PEACE:-)
See auxius windows 7 loader
475 comments:
«Oldest ‹Older 1 – 200 of 475 Newer› Newest»is this like a new verision of RemoveWat or something ?
because i tried removewat 2.2.6 and it says that WAT's already removed :S
i just checked yours, it's the same. RemoveWat is not the solution.
help please.
do i try uninstalling the update or wat ?
ow i see u updated, alright, i hope u find a crack.
can u please update me on that by emailing hambuga@hotmail.com
I'm using 2.2.6,and you don't need to uninstall SP1 patch:-)PEACE!
Hi, I'm currently trying to do this.. will let you know whether it works or not.
After Step 5 what do i do ?
i mean step 6
what i did after step 6 was run removewat as adminstrator. But i didnt do it in silent mode.
and then i used windows 7 loader to activate my windows again and it didnt seem it worked like how it normally does.
so i still have my watermark on the lower right corner of my desktop.
help please
@Mohamed:thnx bout that,POST updated.Re apply all the steps above i mention,and don't use win 7 loader.
I have no dll.host.exe in my task manager ...
Same here I still have the message this copy is not genuine on my desktop although I dont see anything about "non genuine" in control panel>...>system: no message its genuine and no message its not genuine.
TNX DUDE!!!!!!!!!!!!!!!!!!!
If u follow the 6 steps it works fine!
Thankssss
i get an error in step 5 . it says invalid parameters and stuff like that. is that normal ?
like... i had to press ok 3 times. 1 each for different errors
and the watermark is still there ! :S
Did you follow Step 4 and 5?
works perfectly x64 system.
thank you
i did follow step 4 and 5
Worked for me.
Saved me many hours of lost sleep..
hi. i'm having trouble with step 4. after i enter the comand and press enter, it sais ''smlgr is not recognized as an internal or external command, operable program or batch file''. is i reboot at this stage, the watermark is still there. any help please?
i am having the same problem as above i.e
''smlgr is not recognized as an internal or external command, operable program or batch file''. is i reboot at this stage, the watermark is still there. any help please?
Hello I use server 2008R2 and have the same problem. Only there is no KB971033 in the list at all. I runned the Wattremover. Is that enough or do i also need to do step 4, 5 and 6? Looking for a quick answer Thanks!
Thanks for this, dear sir, it worked! ^^
POST UPDATED: Download slmgr posted above and paste it on C:\windows\System32 folder.Be sure your running a administrator account and run cmd as administrator. type command correctly "slmgr[space]-rearm" if successful on step 5 a msgbox will appear says that "It will take effect after you restart" press ok then Restart. After that proceed step 6 and 7.
Do I also need to do step 4, 5 and 6 on win 2008 R2 Sp1 or not? I didnt have 971003 installed but I did get the genuine message and used the Wat from step 2.
nikki james, hats off to you! I can confirm, it is working... I was about to tell you it is necessary to change slmgr also in C:\Windows\System32 for 64-bit Win users, but you already uodated guideline... GOOD JOB, WELL DONE. Many many thanks for that. anonymous user from Slovakia
hi. i was the first guy to post about the slmgr not being recognized. the newly posted method worked. thank you.
works for me... thanks alot man.. from user malaysian..
in 32 bit there is no folder called SysWOW64 in C:\Windows
lol.
u mean the opposite right ? update it.
Still do I need to do step 4 till 6 on a server 2008 or can i just run the Watremover because there isnt a KB971033 but only the genuine. Would be nice if someone could respond asap so I can finish the install of the pc :P Thanks!
''smlgr is not recognized as an internal or external command, operable program or batch file''. is i reboot at this stage, the watermark is still there. any help please?
remove the " infront of smlgr.
it worked :) thanks alot .
But u gotta correct step 4 lol .
@mohamed thanks for that man:)already changed it.
For those who say thanks: its goo to know it worked all of you guys,and you are all welcome.
@Server 2008 R1:Reapply all the steps,Give it a try:)dont use WatermarkRemover,it will only remove the watermark
@"smlgr is not recognized as an internal or external command, operable program or batch file": Type the command properly its "slmgr[space]-rearm" without the "
The slmgr file you've got posted downloads as a text file. What is it supposed to be so I can try and fix it. I'm stuck at step 4 because of this.
For the moment it works!!! Thanks!
slmgr.vbs.removewat not present istead i have slmgr.vbs.disabled in my system.i tried to rename this and over your slmgr.vbs file all all other steps still on windows wallpaper it shows not genuine...i think its worked now the word on right botton is gone now
in windows activation in my computer properties its showing 3 days until automatic activation...is that normal...but it shows some missing file when i click it
This is great work!!
Hey, thanks for taking the time to put this tutorial together. I tried it and it seemed to work. The message has disappeared from my desktop. However, now when I click on 'System' it shows 30 days remaining for activation. Is this bad?
Thank you so much! Took me a couple tries because windows reinstalled the update after the restart. After I Uninstalled it again and shut down dllhost like you said, your tutorial worked great!
@slmgr file downloaded as text file:I updated the post,see above.And repeat the whole Steps:-)
@Ankush Saxena: Repeat the whole steps,i updated the post above.Gudluck:-)
@System' it shows 30 days remaining for activation: Repeat step 1,2,3 and 6 :-)
Thanks so much,it works!:-D
Everything seems to be back to normal now. Keep fighting the system, respect!
Thank you! This worked fine on my 32-bit Win 7 laptop!
Worked absolutely fine to me. Great job. Tks!
My impression is that the PC became slower after install SP1? Any one else could report your PC performace?
The fix worked well here but as said above the PCs (I have two desktops) are worse in performace in Windows... I could notice lots of access in HD and windows 7 thinking time increase.....
I apply steps from 1 to 6 and it work great for my laptop. Thanks a lot.
i do step 6 and says product activation failed?
any ideas?
it says 3 days remaining thou?
is that ok?
step 5 will do mate!
I am getting an error that the maximum allowed number of rearms has been exceeded and that i have to reinstall OS .
PLEASE HELP !!!!!!
Thanks. Works perfectly on my 32 Bit system.
Hello! I did everything that it's said, I used the slmgr v2 because it said failed, but then it said Activated! I restart, and in Computer properties still says 3 days until activation :( I checked and the KB971033 isn't installed anymore.
What should I do? Should I ignore it or repeat from step 3? Thanks!!!
Ok so I repeat the cmd steps and still says activated but I still get the 3 days thing :( I'm running Win7 64-Bit
I'm about to try this since the "not genuine" message came up today for the first time in about 4 months. KB971033 has been out of my system since then. Do I need to do anything differently?
thanks it worked for me
you're great!
it worked OK
God Bless You!
1000 thanks!!!
I posted: "I'm about to try this since the "not genuine" message came up today for the first time in about 4 months. KB971033 has been out of my system since then. Do I need to do anything differently?"
I started the download of the Removewat program and my AVG called it Malware....Does anyone have any insight on this? Is AVG too sensitive or is it possible someone has hijacked the link?
I like all the positives above, but I'm not a power user and am a little leery of creating a bigger problem than I now have.
Thanks in advance for all your help.
It's false positive,disable your AV before you download RemoveWat.Skip step 1 and do step 2-6.Gudluck:-)
THX, it worked for me (Win7-64b) and I did procedure Feb 25. Unfortunately watermark comes back once in while... It seems to be linked with some MS applications like Media player unless they do random check through IP? I use the REARM & reboot and it solves it but my fear is that there maybe is a max number of rearm...?
Glad to head that:-)and no need to worry about max number of rearms,that wont happen because i mod the script.
I had the AVG false positive. All the steps worked, except the last. I seem to be having trouble. The activation window says "Product activation failed"
I get a "The activation server determined the specific product key is blocked" at last step
Whenever running the slmgr -ato command I get the following error:
Activating Windows(R)7, Ultimate edition
On a computer running Microsoft Windows non-core edition, run 'slui.exe 0x2a
0x80072EE7' to display the error text
Error: 0x80073EE7
Any thoughts on this and how it can be fixed?
Worked like a charm on my laptop!!
Thank you very much (: It works very good...
Works great thanks a lot w00t w00t
Thank you a lot!!!!!!!!
i have updated the slmgr script file.PEACE:)
It works!!! Thank you very much. You are a genius.
So, re-paste it as per the instructions in step 4, etc?
KB971033 keeps showing up after reboot. Even after following step above to kill dllhost.exe. How can this update be removed so that it is gone for good?
It does not work. I followed all your steps and did not receive a single error message. I also used your new slmgr file. However, it still says "30 days to activate. Activate Windows now". Any ideas? Thx
It worked OK but unfortunately watermark "THIS COPY OF WINDOWS IS NOT GENUINE" returned today, any idea?
Cheers,
- The Mole
it worked but several hours later the windows not genuine watermark showed up in the bottom right corner again. This is the only annoyance since the not genuine warnings have stopped I think.
I'll post a tutorial regarding on how to completely eliminate watermark on windows 7,by tommorow. Peace:-) enjoy your stay.
@KB971033 keeps showing up after reboot: Uninstall it in safemode,then step 2-6 in normal mode.gudluck!
Thank you so much! It took me a few tries, but I think I got it.
Is it safe to download other Microsoft Updates?
It worked yesterday. Annoying watermark disappeared yesterday but today it has returned! Please please please help us get rid of this super annoying thing.
Remove annoying watermark:
http://processorcores.blogspot.com/2011/02/how-to-remove-this-copy-of-windows-is.html
Yes its safe to download and install other updates except WAT.
PEACE;)
Dear Admin,
it worked so far...
I'll keep you updated if something will pop up again in the next days.
Cheers,
- The Mole
Hello Admin,
I restored the system to a week ago but still, the buttons to minimize, maximize, exit, don't work...
:-(
Cheers,
- The Mole
@the mole:What OS you are using? 64 or 32?
@ Mole: Don't restore your system to an early state.that wont fix the prob.if using 32bit go to System32>en-US> delete the file "user32.dll" and rename the file "user32.dll.AUXIUS" to "user32.dll.mui" Open CMD enter "mcbuilder.exe"then restart your pc.
Everything seems to work ok until step 6, then when I run "slmgr -ato" it comes up saying "Error: product not found" any idea what is going wrong? Thanks
Tried restarting and still got the same error. Then I repeated steps 5 and 6 again and still same error.
sory about that,i have updated step 4.gudluck!peace
First of all, thanks for your hard work!! The bad news, I get the 30 day countdown. I followed all your steps, including repeating steps 1, 2, 3, and 6 and I still get the message (now 29 days left). I'm running the 64 bit version of windows 7.
Forgot to mention, I could not complete (re-complete) step six without first renaming slmgr.vbs.disabled to slmgr.vbs (again).
oh yea,i see.i have updated the post.
@trushy:I'll find a solution.stay tune.tnx man:-)
Worked like a charm @ Admin. Much appreciated for the fix.
Hi admin,
I think that KB971033 inside SP1 cause problem when SP1 is instaled, and question is how to uninstal this because it is not visible on list for instaled updates, but it is there ?
Question is also if there is difference in the contents of SP1 downloaded manualy from your link above, and the SP1 instaled via windows update function ?
I said it because my windows and updates worked fine undtil I instaled SP1. After that I got the message that this copy is not genuine etc. I removed SP1 but it didnt changed anything.
Yesterday I found your guide, did as described and as I could see it was successfuly done BUT it was without SP1.
I could not avoid, I wanted to see what will happen if I install SP1 again. I did it via windows update and after instalation it started to count down from 30 days.
I tryed to repeat steps from your guide but without success. It still count down.
When I visit windows update, it show that all important updates are instaled. KB971033 is not on the list. KB971033 is also not visible on the list of installed updates because many is hiden under service pack, but in a thir window, I can see that it has been instaled as last update. Problem is that I can not remove it from there, and I dont have access to it.
I supose suppose that I dont had success with your guide in second round because KB971033 is still there, and I guess that this is reason why some other also dont had success with this. I dont understand how some could do it while SP1 is instaled.
Hope that you understand above and have solution?
Best regards, ZS
Hello, Ive tried this and it worked at first. but after another system reboot, the watermark appears again. any i dea on what i should do? thankyou for your time and help, i'd appriciate it :-)
@~Soulx:what is your current status in your System Properties? WinKey + Pause Break..
maybe this should help
http://processorcores.blogspot.com/2011/02/how-to-remove-this-copy-of-windows-is.html
:-)tnx
@Admin
I have 32 bit.
I followed your instructions and it's working again, much appreciated for the fix. You're the Boss!
:-)
Cheers from Italy,
- The Mole
@Admin
Hello Master,
I realized now I have too the 30 day countdown as Tushy said above. If I click on it an error message pops up:
C:\Windows\system32\slui.exe
Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item.
I remain tuned in for your fix...
Bestest,
- The Mole
Hi Admin,
Which of above solutions can stop counting down the days for activation ?
I use 32bit version.
I instaled SP1, got the not genuine message,removed SP1 and then used your guide in begining to fix it. It worked fine, but then I installed SP1 again, and then system began to count down the days.
I tryed to do it again but without luck.It seems that KB971033 cause problem. It is not visible on the list of instaled updates, but it is there, instaled together with SP1, I can not remove it and above guide dont work because its instaled. What to do ? Thanks for all !
Best regards, ZS
Worked like a charm
Hi Admin,
Unfortunately I installed service pack 1 today and got the not genuine message.So I started applying your solution but there is not an KB971033 update to uninstall.Any tip for me?I would really appreciate your help.
Thanks for your effort in advance
Hi Admin,
I can't find the KB971033 update propably because I removed months ago..so should I skip step 1 and continue with the other steps?
hi admin,
I have problem on step where you have to type slmgr -rearm i always receive error message "slmgr is not recognized as an internal or external command, operable program or batch file"
please help - thanks in advance
jersey
nice. perfectly works.
thanks very much!!
[UPDATED] must read Important note added above..
very much welcome;)
!PEACE!
@The Mole: lol..i really appreciate it.
@I can't find the KB971033 update:proceed step 2-7.i updated the post above.good luck!
@pidula: download slmgr link posted above,extract the file "Extract this first" then inside on it,copy the file slmgr then paste it on c:\windows\system32 folder.hope that would help.
Hey, on step 5 I get message “On a computer running Microsoft windows non-core edition, run `slui.exe 0x2a0x8007007E` to display the error text
Error: 0x8007007E”
What should I do?
Thanks,
Ivan
if you have that error its fine.just proceed to step 7.
Good luck...
Admin you're the man..I'm grateful
@ADMIN okay i did what you said and it says "2 days until automatic activation"
and I followed the steps in your other page that you requested i look at.
Now the watermark disappears, but after a normal shutdown and restart it appears and then goes away after awhile. its quite odd...
:0
Hi admin,
For us who have installed SP1 and have time bomb because of this, is not possible to do the steps 1 and 7 regarding KB971033. I did these steps allready before I instaled SP1 and your guide worked fine for me, but after SP1 instalation, KB971033 has been installed again and it is not more on important or hiden update list.
KB971033 is part of the SP1 and question is how to uninstall it now from SP1 because it is not visible on the update list ??? Is there any difference between manual installation of SP1 and installation throught windows update ? To avoid KB971033, maybe is necessary to download and install SP1 manualy from your link above ?
Best regards, ZS
And oh by the way, in addtion to the above your antivirus wont recognize it as a virus, trojans or whatsoever harmful apps cuz its a clean one..
@ZS:sorry for the late reply.i am kinda busy testing stuff.i cant answer it right away,maybe after i finished this test.i am gathering information about the disadvantage and advantage of installing it using windows update or the manual update.well in my case i did installed it online using windows update,and after i installed SP1 then a message appeared said that "my copy is not genuine" when i checked on the installed updates KB971033 was on the list.and my problem solved after doing the steps i mention above.by the way i'm running 64bit ultimate i downloaded it on torrent site by BIE,its a OEM and already activated after you install the OS.
Updated post above[Important note,step 1 and 6]
ADDED - Step 6a
On second thought,RemoveWat doesnt disable the time bomb.what i did was after i installed a clean copy of windows 7[not activated]and run RemoveWat,then i run CMD and type the ff command "slmgr -xpr" it shows that the time bomb is still functioning,and basically what RemoveWat did is only to remove Activation Info Section on System Properties[Windows Key + Pause Break] and tampered 1 file on system32\en-US folder.
If you implement method i mention above[UPDATED]
it will defused the bomb!
PEACE!
Since you updated your instructions on March 3 are these directions now only for people who have not installed SP1?
it's still applicable for those who have already installed SP1 on their system.
PEACE!
OK, so I tried again with the added cmd "slmgr[space]-upk". Now, when I go to windows update I get this error:
Code 80070002 Windows Update encountered an unknown error.
On the plus side (I think)under Windows Activation is now says Status Not Available and Product ID: Not Available.
I do have the watermark on my desktop though.
Thanks in advance for your help!
To resolve Code 80070002 ERROR:
Click start button type 'services.msc' on services right click 'windows update' and select Stop[don not close services]
Then go to *\windows\SoftwareDistribution folder,double click "DataStore" folder.Delete all files and folder inside..Click Back button,in the SoftwareDistribution folder double click 'Download' folder and delete all files and folders inside..
Go to Services right click 'Windows Update' select Start.and restart pc
your windows update should work after.
[UPDATED]
Updated: Step 2
ADDED: Step 3a
@trushy: apply step 3 and 3a except 4,5 and 6.
PEACE!
@ADMIN, I have done the above steps a week ago [on 25/02, before all the latest updates] on both my computers running Windows 7 Ultimate x86 and everything is running smoothly with no problems so far. When running "slmgr -xpr" in CMD I get "Windows(R) 7, Ultimate edition: The machine is permanently activated." Should I redo the process following the updated steps to be on the safe side or there's no need?
Keep up the good work and thanks in advance.
No need for you to do all the updated steps as i mention above.your good to go;)thank you and PEACE!
@Admin
Hello Master,
today the machine asked for the following update which I did, I thought it wasn't something terrible:
Update for Microsoft .NET Framework4 Client Profile (KB2473228).
Well, guess what happened after the update?
The watermark THIS COPY OF WINDOWS IS NOT GENUINE re-appeared again!
So I'm back to follow your step by step, inlcuding the ones, of course, that allow me to re-enable the minimize, maximize and exit buttons that the remove wat disabled for unknown reason...
Health be with you, always.
- The Mole
@The mole: how are you man?are you running 64bit or 32bit?use RemoveWMx86 if your running a x32 OS and RemoveWMx64 for 64bit OS.tell me if it works.thanks;)
PEACE
How to add to the registry "Take Ownership"file?
Just double click the "take ownership.reg" file. and click Yes.
Hi admin, I followed every steps. Now the 'Windows is activated' and the product number is no longer appearing in the system properties window (windows button + pause break button). I also can't do Windows Update and the not genuine message is permanently showing on the desktop. Previously after applying slmgr -ato, the message will go away but return on & off. This time after applying slmgr -upk, the not genuine message sits permanently. What should I do next?
Hi Admin. First of all, thanks for your useful suggestion. I applied all the steps and everything is run without problem. Now the system ask to put the "product key" and running slmgr -xpr a windows shown error "Impossible to find "product key"". Do you have any suggestion ? Thanks in advance for your help.
Did you do this method mention here:
http://processorcores.blogspot.com/2011/02/how-to-remove-this-copy-of-windows-is.html
The message "This copy of windows in not genuine" should not supposed to appear after you apply the method. what error you get when you check for an update?
hmm there is no such thing as "Impossible to find a product key" can u give me a screenshot where the system ask you a product key? the file that is responsible for that message shouldn't be working after you applied Remove Wat. the system shouldn't be asking you a key.ill look forward into that.
Hi Admin, thanks for your reply. I've justr sent email with details.
@Admin
First, thanks for what you're doing for everybody.
Regarding my pc, I have 32 bit, yesterday I tried your "slmgr -upk" and it worked greatly. Today I turned on my computer and the watermark re-appeared again, yesterday I removed it since it popped up after this update: Microsoft .NET Framework4 Client Profile (KB2473228).
Later I'll re-do step by step your procedure...
Have a great week-end,
- The Mole
Ok i received your email,check my reply.Thnx for that.
@The Mole: Dont redo all the steps man,for sure you get tired.lol..download this file http://www.mediafire.com/?xd3w6ts21x5d31x
Open Task manager> end this process 'explorer.exe' on Task Manager click 'File' on menu.select 'New Task' type 'cmd.exe' and enter this command 'del c:\windows\system32\en-US\user32.dll.mui'[if access denied,take the ownership of the file user32.dll.mui first then repeat this command]
after that enter this 'c:\windows\explorer.exe'[this should restore your desktop]
paste the downloaded file on 'c:\windows\system32\en-US\' folder.and restart.
PEACE
Thanks ALOT!!!! :D
@Admin
Hi Boss,
I followed your instructions, deleted the file, put the downloaded one in the folder as you said but THIS COPY OF WINDOWS IS NOT GENUINE at bottom right corner, unfortunately, it's still there...
Looking forward to your news.
Peace,
- The Mole
oh! open CMD as admin,enter "mcbuilder.exe" wait until finish.and restart your pc.
God be with you...
in system properties. there is nothing about windows genuine.
after having done successfully all the steps.
your doing fine;-)
PEACE!
how to make it genuine now?should i use crack..
nope its already genuine.the important thing is that the bomb on your windows 7 has been disabled.
PEACE!
Hey, I did everything as it said and rebooted, but as windows was starting up, it told me that a setting had been changed and it asked me to enter a product key. As a result, my windows is still not genuine.
Can anyone help?
Thanks
Run CMD as admin, enter this command "slmgr -ipk[space]22TKD-F8XX6-YG69F-9M66D-PMJBM"
the command should install a new product key for your OS.if successfully installed,restart your pc or email me if it is invalid.
After restart Run CMD as admin. enter the command "slmgr -rearm",restart your pc.
and after that check it using "slmgr -xpr" as you mention before. if it says "30 days to activate" then repeat the entire steps 1-6 and 7 except 6a.
Regarding my previous post that the not genuine message stays permanent after applying slmgr -upk it's now working fine.
I redo steps 1, 2 & 3 but not 3a. I deleted your systemcpl.dll file and put back my original systemcpl.dll in system32 folder. Then I continued with steps 4, 5 & 6 without applying 6a. Finally I followed your Remove Watermark guide and the not genuine message was gone after reboot. It has not appeared for the last 2 days & I assume it is now fixed.
FYI, when I launch system properties thru windows key + pause break, I can see Windows Activation with 'status not available" and 'product ID not available'. It didn't bother me because I can continue to update.
Hopefully this is finally fixed.
Thanks again Admin for the great work.
Hi Admin, after receiving your reply asking me to overwrite the systemcpl.dll file with your file, I tried to do a Windows Update but got an error message code 80070002. Therefore, I followed your instruction and deleted my old systemcpl.dll file and put in your new file. Then I reboot the pc. When I tried to do Windows Update again, I got the same error code 80070002.
What's wrong again? Do I need to redo the slmgr -rearm, reboot then slmgr -ato steps again?
I need to be able to do Windows Update after deleting the not genuine message.
Please help. Thanks
Try this:
To resolve Code 80070002 ERROR:
Click start button type 'services.msc' on services right click 'windows update' and select Stop[don not close services]
Then go to *\windows\SoftwareDistribution folder,double click "DataStore" folder.Delete all files and folder inside..Click Back button,in the SoftwareDistribution folder double click 'Download' folder and delete all files and folders inside..
Go to Services right click 'Windows Update' select Start.and restart pc
your windows update should work after.
OK,restore your original systemcpl.dll file and go to System32\en-US folder and overwrite the file "systemcpl.dll.mui" with this
http://www.mediafire.com/?slyzx1w85dqxo5g.
Hi Admin, I have tried method 1 for error code 80070002 & also method 2 restoring systemcpl.dll file as shown above but have been unsuccessful.
I'm still getting error 80070002 & no longer can do Windows Update.
Also tried to slmgr -rearm & it was ok but couldn't get past slmgr -ato because I got a "error product not found" message & can't proceed further.
Should I take out my Windows 7 DVD and do a repair? Is it gonna reset everything to original state so that I can redo steps 1 to 7?
@The Mole:
send me your "user32.dll.AUXIUS" file man.
follow instruction mention here
http://support.microsoft.com/kb/971058
and redo all the steps if your done on the windows update error.
PEACE!
I cant delete slui.exe or change its permission by right clicking it.
I executed every step perfectly and dint got any error.
But in MY Computer-Properties 30 day activation is coming..
Is it because of slui.exe...
how can i delete it...
And now i got the water mark as well after every thing was remove...:( :(
is it because of slui.exe not deleted...plz help...
Do not delete "slui.exe" on system32 folder.
instead delete this file "slui.exe.mui" on system32\en-US folder.
i updated the instructions above..
And post your comment along with your name.
PEACE.
Works 100%!!!!!!!!!!!1:-D
Hey, thanks for the guide.. However I can't delete "slui.exe.mui" on system32\en-US folder. It says that I dont have permission. I tried to change permission to full control, but its greyed out.. Any help? thanks!
Hey Sorry for posting without name..i managed to remove the water mark and hopefully the 30 days activation thing as well..
But i am not able to see MyComputer-->Properties by right clicking it.
Even from the Control Panel-->System & Security-->System-->NO RESULT...:((
What might be the case...
Thanx in Advance...
Ritesh
Take the ownership of the file first,Right click "slui.exe.mui" file select Take Ownership then set the permission to Full Control on every username. or try this:
Open Task manager> end this process 'explorer.exe' on Task Manager click "File" on menu.select "New Task" type "cmd.exe" and enter this command "del c:\windows\system32\en-US\slui.exe.mui"
after that enter this "c:\windows\explorer.exe"[this should restore your desktop]
paste the downloaded file on 'c:\windows\system32\en-US\' folder.
@Ritesh:Did you reboot your computer after? if not restart your pc.what else did you notice?
Hi. I can't find slui.exe.mui in the system32\en-US folder. Now it asks for a product key. What should I do?
Armanda
@Ritesh: download "systemcpl.dll" file.download x86 if your running 32bit OS or 64bit.Download link posted above[step 3a].
@Armanda:Can you double check it? it can be "slui.exe" a MUI extension file.
or still cannot find do this:
Run CMD as admin, enter this command "slmgr -ipk[space]22TKD-F8XX6-YG69F-9M66D-PMJBM"
the command should install a new product key for your OS.if successfully installed,restart your pc
After restart Run CMD as admin. enter the command "slmgr -rearm",restart your pc.
and after that check it using "slmgr -xpr" as you mention before. if it says "30 days to activate" then repeat the entire steps 1-7,i sis an update on my instructions above..
@Admin..
Hi Boss...
I tried..though i did that step initially as well
I am running 64 bit OS..and as per the steps i just pasted Systemcpl.dll (downloaded) to sys32
and then i tried pasting it on SYSWOW 64 as well..but with no result...:(
MyComputer --> Properties
ControlPanel-->System Security-->System
both of the above not accessible...:(
Plz help..thnx in advance
Ritesh
Ok,apply Step 2,1 and 7..
Hey admin,
1. are you still working on an automated program that does all stuff for us :) I'm willing to wait for it before doing anything
2. you gave a link from microsoft site to download sp1 but that download requires validation too!? or am i mistaken
Hey Admin..
My Updates are permanently switched off
WAT manually removed from sys32 and syswow64
RemoveWAT.exe used
no KB971033 installed
Restarted several times.
still cant access MyComputer--Properties...:(
wat could be the reason
Ritesh
@Riteng:Do this for the last time.put the systemcpl.dll on system32 folder and sysWOW64,then run Step 2.and restart.if still you can't access y:our system properties dont you worry.email me at auxiusxxx@ymail.com.ill send you the file there.
PEACE!
@fitneci: Yup still working on it,it would take some time thou.thanks for w8ng;)
Yup required validation.If i am not mistaken you can still download the file if your still on trial..i maybe upload the SP1 patch on any host file site and post it here.or you can find on many other site,PEACE!
Admin thank you very much! It worked but after the last restart windows couldn't be closed with x button. I tried the System File Checker (right click on cmd and select Run as Administrator, type sfc /scannow ) and the problem was solved. thanks again.
Hey for some reason your download found at http://www.mediafire.com/?3kldunnfdkvmm75 is not working for me. Every time you go to download it just takes you back to the default download link again. No dialog box or anything. Could you possibly reupload it or use another uploading source?
THE RELEASE DATE OF BETA VERSION OF MY LOADER WILL BE ON MARCH 25 ,2011.
PLEASE SUPPORT THE SITE BY CLICKING GOOGLE ADS.
"AUXIUS LOADER" COMMING SOON..............
-LOVE- NIKKI
Thank You very much...
Worked like a charm.. Words cannot express how thankful I am
Hello Admin
Unfortunately, it still has not worked. I ran CMD and entered the slmgr followed by the product key you gave me, a message then appeared which accepted the key from "windows file host" but I then restarted the computer to find that windows still wasn't genuine. I then ran CMD again and entered the slmgr followed by "rearm" and restarted again but windows is still not genuine.
I really appreciate what you have done for me.
Thank you for your help so far.
Colum.
Hey admin did the step 2 after copying the Systemcpl.dll in the both the sys32 and syswow64
and using remvoewat which was disabled since it was already removed.
But i still cant access mYcomputer--[rightclick]--Properties or even from Control panel.
I have already mailed you ..Help..
Ritesh
works like a charm........thanks guys
How do you add Take Ownership.reg to the registry?
Double click the registry Take Ownership.reg file.
im unable to delete slui.exe.mui file dont know why any help thanks.
@Unable to delete "slui.exe.mui":
Right Click the file "slui.exe.mui" Select "Take Ownership"
Right click slui.exe.mui file select Properties.Click "security" tab,click "Edit" button.And on every User names or Group below tick "Full Control" apply and delete the file.
Thank you so much! That SP1 update crapped my activation crack. Thanks for helping me fix it. :)
Hey again,
Still getting error 80070002. I've deleted my "DataStore" and "Download" folder contents with Windows Updates stopped but after I restart, the DataStore contents return and I still get the error. I haven't removed the watermark yet because it doesn't annoy me that much. yet.
Any ideas?
Also, under my computer, properties, Windows Activation, if it says status not available and product ID: not available, that's good right?
Thanks again in advance
Many Thanks! I followed your instructions after getting the dreaded "Win 7 build 7601 not genuine" error after installing service pack 1 and now it has been running fine for a week now. I installed the updates for the x64 based systems this week after being notified and so far everything is still good.
@Trushy:
Run CMD as admin, enter this command "slmgr -ipk[space]22TKD-F8XX6-YG69F-9M66D-PMJBM"
Then redo Step 1,2 and 3.
PEACE!
Okay... I've been running W7 SP1 since it launched, but only *today* does the 'not genuine' watermark appear. I assume I have 30 days to apply the rather insanely convoluted steps listed above to correct winblowz evil scheme to nuke my system?
I eagerly await the much more simple approach you hope to release on the 25th, as I most certainly do not want to risk the dozens of virus laden hacks, cracks, and keygens popping up out there. I've been running the previous version of your app swimmingly since it was released...
Though the dual boot issue is annoying (not sure if it's the system or the app, both 'boots' are identical).
Thanks for your hard work!
Peace
After running cmd with the command you specified, I can now update windows but the timer is back. While trying to complete step 3a, I cannot delete the file systemcpl.dll before pasting your version. I also cannot change the permissions on the file to allow me to delete it.
Ok. Got it now! The instructions for applying the take ownership.reg file follow the removal and replacing of the systemcpl.dll file. Since I was unable to remove and replace I stopped there. Maybe you should switch them in your instructions.
Now there is no entry under Windows Activation, no watermark and I just updated windows.
You rock!
BTW, I never download the Windows Malicious Software tool - what your thought on that update?
Thanks for everything!
Thanks a ton. This worked perfect. You may want to update to mention that if WAT is already installed you should uninstall it and install it again. That's what I did and it worked like a charm.
Thanks
Top draw. If you follow the instructions implicitly then this definitely works. Thanks so much
THanks works perfectly!!!
I did all the steps multiple times except slui.exe.mui was not in my en-US folder so I couldn't do that step. It still says in three days until windows activation. What should I do?
Will really appreciate your help.
Hi,
thanks for the help.it works but i have few questions
i can't delete "slui.exe.mui" and I have 12 files of "slui.exe.mui" in my computer :( ... izit matter??
can i just leave it as it is???
I have few things that cannot follow precisely. Like i can't replace "systemcpl.dll" :(
what i do is, u take ownership in the existing "systemcpl.dll".
there is no "dllhost.ext" in task manager ...
remove WAT does not work on my computer at all
however, its looks fine now .. hopefully it is fine =)
Just to let you know =)
Thanks again for ur sharing its doesn't help me out alot =) thankssss ya
SICK! you rock dude!!
This is weird, but everytime I type in my password to get into windows, the screen goes Gray and explorer (the shell) never comes up. I have to control+alt+delete, then type in explorer.exe to get the shell to load. Any ideas?
Other than that, it works great!
Tnx bro, working perfect! No stupid message Windows is not genuine !
Somehow my screen went dim after I completed all the steps and restarted my pc. Other than that, it worked perfectly! Thank you!
Thank you for your efforts. Works for me!
hi,
i followed every step and pasted systemcpl.dll but i cant take ownership of slui.exe.mui
also i accidently deleted slui.exe in system32
will that cause a problem?
Hye there!
Thanks man! work fine right now....just follow 6 step..Win7 32bit
Okay...so i have A pirated/cracked version of windows 7. I have tried updating to SP1, but it has failed 3 times.
What i am wondering is:
-Should even install SP1?
-If i install SP1, will it get rid of my crack?
-How do i crack it, AFTER i install SP1?
@princess: wait til my loader will be release this coming march 25th.
To all: Peace! Please share this site.
Thank you so much for this tutorial! You've saved my day! And indeed: PEACE to you man!
Do I have to wait until the WPA expires? Or do I have to reset the clock before doing all the steps? Best regards and wish you all the best.
--Post-script:
I only used Anonymous because my prevoius comment doesn't seem to work with the other comment options. Sorry about that.
--KaiJeyAn
Hello,
thank you for your effort. I have a doubt.
I followed all the tutorial and seems that everything worked for me, but after the last rebot, my system properties doesn't show any information about windows activation. Is it correct? After I installed RemoveWat, it simply disappeared from this window.
Thank you.
Hi, I did all your steps. It removes all the windows genuine notifications except the one in control panel. Can you help me? Thanks.
OMFG I LOVE YOU SO MUCH.
(First, forgive me for my english, i'm french).
I had the issue with the 30 days activation after installing W7 SP1.
I couldn't find any useful tips and after trying to apply RemoveWat again (after the update KB971033 auto-installed), I decided to uninstall it and apply RemoveWat again. But it didn't work at all. So, as sad as I was, I considered buying a Windows 7 Ultimate original copy.
But when I tried (before buying) to check if I was even able to change my product key, I had the issue with "slui.exe" saying "Windows cannot acces....". And everything I tried was unsucessul. So, why buying an original copy if I even CAN'T change the serial ?!...
I followed every step you gave, and it looks like I have no more issue. Windows seems to run great.
So : THANK YOU.
But I just had a little problem during the "delete the "systemcpl.dll" file" step, even with "taking ownership" and modifying permisions on it, it said "Can't delete because it is already opened", actually it was exporer.exe. I just used a little software called "Unlocker" to remove that dependency, and here I go, I could delete it.
Thanks again bro.
Best regards from France.
Worked for me!!! U are godlike man :))THXXXX!!!
hey today is 25th march and i am waiting to see the loader :)
Post a Comment